Toshiba Magnia Z300 Manual Do Utilizador
System Configuration Setup
SCSI Utility
153
Changing SCSI Device Settings
1 Using the arrow keys (<
↑
><
↓
>), select the desired item then
press the <Enter> key. The submenu or selection menu corre-
sponding to the selected item appears.
sponding to the selected item appears.
2 Make any necessary changes then save the changes.
3 Select Exit this Menu to exit the submenu.
Setting Devices
Select Configure/View Host Adapter Setting in the main
menu in the device setting screen mode to display the
Adaptec Utility.
menu in the device setting screen mode to display the
Adaptec Utility.
c
Host Adapter SCSI ID
: 7
Specifies the SCSI ID of the SCSI host adapter. Do not change
this setting.
this setting.
c
SCSI Parity Checking
: Enabled
Controls whether the host adapter performs parity checks and
scans for normal data transfer through the SCSI bus.
scans for normal data transfer through the SCSI bus.
Adaptec AIC-7892 < SCSISelect (TM) > Utility vX.XX
AIC-7892 at Bus:02h Device:0Fh
Configuration
BIOS Information
Interrupt (IRQ) Channel ................. 10
I/O Port Address ........................ 9000h
SCSI Termination Level .................. 1
I/O Port Address ........................ 9000h
SCSI Termination Level .................. 1
SCSI Bus Interface Definitions
Host Adapter SCSI ID ........................ 7
SCSI Parity Checking ........................Enabled
Host Adapter SCSI Termination ...............Enabled
Host Adapter SCSI ID ........................ 7
SCSI Parity Checking ........................Enabled
Host Adapter SCSI Termination ...............Enabled
Additional Options
Boot Device Options ......................... Press <Enter>
SCSI Device Configuration ................... Press <Enter>
Advanced Configuration Options .............. Press <Enter>
Boot Device Options ......................... Press <Enter>
SCSI Device Configuration ................... Press <Enter>
Advanced Configuration Options .............. Press <Enter>
<F6> - Reset to Hoat Adapter Defaults