Toshiba 40RV525U - 40" LCD TV Manual Do Proprietário
Chapter 2: Connecting your TV
19
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby
®
*
Digital
or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby
®
Digital
decoder or other external audio system with optical audio
input.
input.
You will need:
optical audio cable (Use an optical audio cable that has
the larger “TosLink” connector and not the smaller “mini-
optical” connector.)
the larger “TosLink” connector and not the smaller “mini-
optical” connector.)
To control the audio:
Turn on the TV and the digital audio device.
Press
on the TV’s remote control and open the Audio
menu.
Highlight Audio Setup and press
.
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio
Audio Setup
In the Optical Output Format field, select either Dolby
Digital or PCM, depending on your device (
Digital or PCM, depending on your device (
“Selecting
the optical audio output format” on page 45).
Done
Audio Setup
Language
Reset
o
e
r
e
t
S
S
T
M
English
Dolby Digital
Optical Output Format
HDMI 1 Audio
o
N
o
i
d
u
A
C
P
Auto
Dynamic Range Control
Compressed
Dolby Digital
Note:
Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
Digital bitstream signals. Older audio systems that are
•
1
2
2
3
4
•
not compatible with standard optical out signals may
not work properly, creating a high noise level that may
damage speakers or headphones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTY.
The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
not work properly, creating a high noise level that may
damage speakers or headphones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTY.
The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
the double-D symbol are trademarks of Dolby Laboratories.
Connecting an audio system
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
external analog audio amplifier to adjust the sound level.
You will need:
standard audio cables
To control the audio:
Turn on the TV and the stereo amplifier.
Set up a optimum volume level of the stereo amplifier.
Then you can adjust the sound volume level from the TV’s
volume control or the amplifier’s volume control.
Then you can adjust the sound volume level from the TV’s
volume control or the amplifier’s volume control.
Menu item of Speakers can turn to OFF to mute the TV’s
built in speakers.
built in speakers.
•
*
•
1
2
2
3