Test-Um VALIDATOR-NT NT955 Manual Do Utilizador

Test-Um NT955 Series
Ping Test

1. Select Ping Test.

2. Press Select to begin DHCP request (DHCP box checked)

or to Configure IP addresses in manual address mode (box

unchecked). In manual address mode, be sure the displayed

addresses are appropriate for the network being tested. If not,

use the keypad, Backspace (F1) and Delete (F2) soft keys to edit

My IP Address, Gateway Router (GWRTR) and Domain Name

Server (DNS).

3. To change the targets, press the Targets soft key (F4) to

enter the Manual Ping Targets screen and use the keyboard,

Backspace (F1) and Delete (F2) soft keys to edit the target IP

addresses. When entering addresses, the * button is a shortcut

for the period (.) punctuation mark. Press escape when done to

return to the previous screen.

4. Press the Ping Tool soft key to begin pinging the entries with the

box checked.

5. Press Quit to return to the IP Address screen.

Cisco Delivery Protocol

1. Select Cisco Delivery Protocol.

2. Using the RJ45 port, connect the appropriate cable assembly

from the Validator-NT main unit to one end of the cable or jack

and the remote unit to the opposite end of the cable or jack to be

identified.

3. Press Select to display a message “Reading CDP packets from

network” appears on your screen below the CDP message.

Validator

Network Tests