Over And Back PAP2 Manual Do Utilizador

Phone Adapter with 2 Ports for Voice-over-IP

9

Chapter 4: Using the Phone Adapter’s Interactive Voice 
Response Menu

Chapter 4 explains how you can use the Interactive Voice Response Menu to configure the Phone Adapter’s 
network settings. You may need to change these settings depending on the specifics of your local network 
setup. Use the phone’s keypad to enter your commands and select choices, and the Phone Adapter will respond 
with voice responses.

1. Use a telephone connected to the PHONE 1 or PHONE 2 port of the Phone Adapter.

2. Press **** (in other words, press the star key four times).

3. You will hear, “Configuration menu. Please enter option followed by the # (pound) key or hang up to exit.”

Refer to the following table that lists actions, commands, menu choices, and descriptions. After you select 
an option, press the # (pound) key. To exit the menu, hang up the telephone.

While entering a value, such as an IP address, you may exit without entering any changes. Press the * (star) key 
twice within half a second. Otherwise, the * will be treated as a decimal point or dot.

NOTE: If you need to change 
the settings for your Vonage 
Internet phone service, then 
visit www.vonage.com to 
access your online account.