Omnia Industries Turntable 6FM Manual Do Utilizador

 

 

106

106

 

Diagnosing abnormal boot up behavior 

 
 
The rotating Omnia logos are shown below stopped and not replaced by the usual menu and meter screens. 
This means that one or more functions on the Omnia motherboard have not been initialized, but the front 
panel is alive and well. In this scenario, it is helpful to view the Omnia 6 boot progress using the rear panel 
RS-232 serial port and the procedure outlined earlier in this chapter.  
 
 

 
 
 Possible causes for this behavior are: 
 
 
1.  The rear-panel PCMCIA memory card is not properly seated in its socket. Power off the unit, reseat 

the card, and power on again. If the problem does not clear up, call the Telos/Omnia Customer Focus 
department for instructions. 

 
2.  The rear-panel PCMCIA memory card has become corrupted. 
 
3.  There has been a problem loading the DSP code algorithms, perhaps because of a faulty DSP card. 
 
4.  There is a problem on the motherboard that is preventing the main CPU from booting up. Call the 

Telos/Omnia Customer Focus department for instructions.