Omnia Industries Turntable 6FM Manual Do Utilizador

 

 

110

110

Location of PCMCIA memory card containing the front panel user interface 
 
 
Software enhancements that are contained in the front panel PCMCIA memory card must be installed 
internally on the front panel display controller board itself. The display controller card has its own 
PCMCIA memory card containing the front panel user interface program and its enhancements. To install a 
new card, follow these steps. 
 
9.  Remove the Omnia 6 from service. 
 
10.  Make certain that no power is applied to the unit. 
 
11.  Remove all 30 top cover screws and set them aside. 
 
12.  Remove the lid and set it aside. 
 
13.  Remove the front panel memory card by fully depressing the card eject button (see below). 
 
14.  Re-install the new memory card, making sure that it is fully seated in the PCMCIA connector. 
 
15.  Re-install the Omnia lid, using all 30 screws. Tighten each screw snugly. Failure to affix the lid with 

all 30 screws may compromise its susceptibility to RF energy, as well as is electromagnetic radiation 
compliance certification. 

 
16.  Return the Omnia 6 to service. 
 
 
 
    Memory card eject button