Omnia Industries Turntable 6FM Manual Do Utilizador

 

15

15

User Interface Tutorial – Input Source Selection and Peak Level Setting 

The following two exercises are a useful introduction to the user interface. Start from the Main Menu (as 
displayed when the unit is first turned on).  

The first exercise changes a parameter selection (the Input Source selection): 

  1.   Rotate the jog-wheel to highlight Input.  

  2.   Click the jog-wheel (push on the wheel once) to bring up the Input window (shown below).  

 

     

 

 

 

 

 

 

 

 

     

 

 

 

   Input Menu 

 

     

 Home Icon "H"  

 

  3.   Rotate the jog-wheel until one of the Input Source choices: Analog or AES/EBU is highlighted. The 

filled box next to the selection name identifies the current selection. The factory default selection for 
Input Source is Analog. To change the selection to AES/EBU, highlight AES/EBU and click. The 
AES/EBU box will now be filled and the digital input is now active. If you are using the analog 
inputs, highlight Analog and click to reselect the Analog inputs. 

  4.   Rotate the jog-wheel until the Home icon “H” is highlighted in the lower left corner of the window. 

Click to return to the Main Menu. 

  5.  Note that as you adjust the Input Source selection in this menu, the wording above the Input level 

bargraph on the Meter Screen changes to follow the selected source name.