ONKYO MD-101A Manual Do Utilizador

37

• The Combine function enables you to

combine two adjacent tracks into one. You
cannot, however, combine a digital track and
an analog track. You cannot combine two
tracks that were recorded in different
recording modes, either. For example, you
cannot combine a track recorded in MONO
mode and a track recorded in LP2 mode.

• This function is available while the recorder is

stopped, paused, or playing.

Press the MULTI JOG knob to divide the
track.
If a track with a name is divided into two
parts, the former part takes over the name
and the latter part is left without a name.
When the dividing of the track is
complete, “Complete” appears on the

MULTI JOG

1

2

3

4

1

3

4

1

4

5

2

3

display.
Tip:
• The numbers of the tracks following the

divided track will be increased by one.
(For example, if you divide track 2 into
two, the latter part of the track will
become as track 3. Track 3 will be
renumbered as Track 4, Track 4 will be
renumbered as Track 5, and so on.)

• To erase parts of a track, first divide the

track in parts, then erase the parts.
(Refer to pages 52 and 53 for more
information on erasing the tracks.)

Note:
While the TOC indicator is lit or flashing, do not
move or unplug the MD recorder.

Lights when completed

Dividing a track

Updating the track numbers

(Continued on the next page)

• The selected track will be combined

with the previous track.

• If both of the combined tracks have

names, the previous track’s name will
be used for the new track.

• If only the previous track has a name,

the name will be used for the new
track.

• If only the latter track has a name, the

new track will not have a name.

EDIT / NO

To cancel the Combine operation...
Press the EDIT/NO button or the   button.

MULTI JOG

MULTI JOG