Omron V400-H111 Manual Do Utilizador
29
V400-H111/211
User’s Manual
Sec
tion 2
Powe
r Su
pply
Section 2
Installation and Connections
Power Supply
Power must be supplied to the V400-H111/211 via the cable.
Wire the power supply independently of other devices. In particular, keep the power supply
wired separately from inductive loads.
Wire the power supply independently of other devices. In particular, keep the power supply
wired separately from inductive loads.
Use a DC power supply with safe extra-low-voltage circuits to prevent high voltage. If UL recognition is
required for the overall system, use a UL Class II DC power supply.
required for the overall system, use a UL Class II DC power supply.
Connecting the Power Supply (V400-W21-2M/5M,
V400-W20-2M/5M)
Use a power supply that meets the following requirements.
Power Supply Requirements
Recommended Power Supply
■ Connection Method
Wire the power supply cables as shown in the following diagram.
Connect the brown wire to the positive (+) side of the power supply and connect the blue wire to the
negative (-) side of the power supply.
negative (-) side of the power supply.
Output current
Power supply voltage
1 A min.
5 VDC ± 10 %
Model
S8VS-01505