Omron V400-H111 Manual Do Utilizador
60
Section 4
Communica
ting Using 2DCR Conf
ig
ear
V400-H111/211
User’s Manual
Section 4
System Settings
System Settings
Communicating Using 2DCR Configear
The 2DCR Configear can be used to communicate with the Handheld 2D Code Reader.
■ Communication Setting
The following items can be set. However, the settings cannot be changed while the port
is being connected.
is being connected.
The default settings are indicated with an asterisk.
Setting item
Settings
Port No.
COM1
*
to COM 9
Baud Rate
9,600
*
, 19,200, or 38,400
Parity
None
*
, odd, or even
Data Length
77 bits or 8 bits
*
Stop Bit
1 bit
*
or 2 bits
Header/Footer
Prefix
Send
None*, 02 <STX>, or 1B <ESC>
Receive
None*, 02 <STX>, or 1B <ESC>
Suffix
Send
ETX, 0A LF, 0D CR
*
, or 0D0A CR+LF
Receive
ETX, 0A LF, 0D CR
*
, or 0D0A CR+LF
FCS
Send
ON or OFF
*
Receive
ON or OFF
*
Same as Send
Sets the header, footer, and FCS for receiving to the same settings as for
sending.
sending.