Oce North America TCS400 Manual Do Utilizador
Self support tips (GB)
13
How to start the Optimise print quality wizard
1
Press the on-line / off-line key (key 4 on the folded cover) to set the printer
off-line.
off-line.
2
Press the lower softkey for 'Optimise print quality' (key 6 on the folded cover)
to enter the wizard.
to enter the wizard.
3
Follow the steps of the wizard.
4
When there are no defective printheads, you can do a printhead alignment.
When you select 'No', the system returns to the off-line menu.
When you select 'No', the system returns to the off-line menu.
5
When there are printheads with defective nozzles, you can not do a printhead
alignment.
When there are printheads with defective nozzles, you can do the following.
alignment.
When there are printheads with defective nozzles, you can do the following.
■
Continue the printing without the enabling of the fallback mode. The output
quality is not optimal.
quality is not optimal.
■
Enable the fallback mode to continue the printing with optimal output
quality.
quality.
■
Enter the 'Replace printhead' wizard to replace the defective printhead.