Oce North America TDS600 Manual Do Utilizador
242
Océ TDS600 Multifunctional Digital System User Manual
4
Press the green knob inside the roll holder (on the right side) to release the
locking mechanism (see figure 127) and remove the core from the holder.
locking mechanism (see figure 127) and remove the core from the holder.
[127] Pressing the green knob
Note:
You can place the new roll in the groove on top of the printer.
5
Slide the roll holder in the new roll of material while pressing the green knob.
6
Align the roll with the appropriate size indicator on the roll holder and release
the locking mechanism. This line has to be completely visible.
the locking mechanism. This line has to be completely visible.
7
Use both hands to place the holder in the roll compartment (see figure 128).
[128] Positioning the roll
34"
A0
36"
left view