Norton Abrasives Paper Shredder 8 Manual Do Utilizador
Norton PartitionMagic
49
•
To quickly move a smaller hard disk’s contents to a larger, new hard disk.
•
To change the relative order of partitions.
•
To back up a partition.
1
Select the partition you want to copy.
The Copy command is dimmed if there is not enough unallocated space on your disks
for the partition.
for the partition.
You cannot use PartitionMagic to copy Windows NT stripe sets, stripe sets with
parity, or duplex/mirrored sets.
parity, or duplex/mirrored sets.
2
Click Partition
➤
Copy.
The Copy Partition dialog appears.
3
From the Disk drop-down list, select the disk where you want to copy the partition.
4
In the partition list, select the unallocated space where you want to copy the partition.
5
If the partition you specified is smaller than the available unallocated space, you can
position the partition at the beginning (recommended) or end of the unallocated
space. Under Position, click Beginning of free space or End of free space.
position the partition at the beginning (recommended) or end of the unallocated
space. Under Position, click Beginning of free space or End of free space.
If you are copying a logical partition and want to ensure that it remains logical, make
sure unallocated space is available within the extended partition. Or, after copying the
partition, you can convert it to a logical partition.
sure unallocated space is available within the extended partition. Or, after copying the
partition, you can convert it to a logical partition.
6
Click OK.