Nlynx ETU400 Manual Do Utilizador

ETU400 User Guide 011603

 

You can begin using ETU once it is installed on your host system. 

To start ETU:

1.  Load your 5250 emulation software on your microcomputer. If necessary,

load the ETU compatibility program, IBMTRAN, on your PC. See Chapter 2,

Installing ETU, for information about IBMTRAN.

2.  Enter your AS/400 user I.D. and password at the sign-on screen.

3.  Display the ETU menu by entering the following command on the AS/400

command line: wsmenus

NOTE: The AS/400 library containing ETU must be in your library list. 

When the ETU menu displays, you can execute any ETU command, provided you

have proper authorization.

Not all users will be able to use all commands. The commands you are

allowed to use depend on the authorization you are granted by the system

administrator. If you don't have the authority to use a certain command,

it won't display on the ETU menu, nor will you be able to run the command

from the command line. See Appendix A, Inside ETU, for more information
about user authorization with ETU.