Nlynx ETU400 Manual Do Utilizador

ETU400 User Guide 011603

 

After you select the ETU command that you want to run, either by choosing

an option from the menu or by entering the name of the command on the

command line and pressing F4, a prompt screen displays. This screen lists

the parameters associated with the command. A parameter is a placeholder

for a single piece of information, or value, that you must provide to ETU

to tell ETU what to do and how to do it.

When the prompt screen displays, enter a value for each parameter that

applies to your transfer operation. For instance, when you transfer a

host file to the microcomputer, you must provide, among other things, the

name of the host file. You enter the name of the host file in the

FROMFILE parameter. Thus, the host file name is the value to be entered

in that parameter.

Some parameters contain preset values, called defaults. If you do not

need to use a particular parameter, leave it at its default value. To

view all the possible values for a particular parameter, enter a question

mark (?) in the first position of the parameter, press FIELD EXIT, and

then press ENTER. If there is a plus sign ( ) next to the parameter

keyword, the parameter can be extended for additional values. To enter

the additional values, place the cursor next to   for more, enter a plus

sign, and press ENTER.

When you have filled out all the required parameters, press the ENTER

key. If the command contains more than one screen of parameters (which

some ETU commands do), press PAGE UP to display subsequent screens. To

start the command, press ENTER.

Mac directory dialog boxes are available for some ETU commands. A

directory dialog box provides an alternative to entering a value into a

menu's micro file name prompt.

You can specify the location of the Mac file by entering the file name at

the QFNAME1 prompt, or you can display a dialog box. To display a dialog

box, enter an asterisk (*) in the first position in the QFNAME1 prompt,

fill out all other parameters required for the transfer operation, and

press ENTER.

NOTE: The directory dialog boxes are unavailable for the DELETEB and
RENAMEB procedures. 

Use an ETU directory dialog box as you would use any standard Mac

directory dialog box. For information about using directory dialog boxes,

refer to your Mac System Software User's Guide.

NOTE: If you cancel from a dialog box, you receive an ETU user message
giving you the option to CANCEL or GO. Select CANCEL to return to the
WSMENUS options.