Nextar NCU103 Manual Do Utilizador

 Page 9

 Page 6

      F).In MMC/SD, USB or MP3/WMA disc mode, M6 and M5 is assigned as 10 TRACK up/down 
          when normal play.

      Press it to select RADIO, DISC, CARD(after inserting MMC/SD card), USB(after inserting
      USB bar) and auxiliary input playing mode.

15. AUXILIARY INPUT JACK
    
      You can connect any external audio device to the auxiliary input jack. Then press the mode
      button to select auxiliary input playing mode, use the volume control to adjust volume.

      When needing to do MMC/SD or USB playing, insert the MMC/SD card or USB bar into 
      MMC/SD compartment or USB socket. Then the playing mode will be changed into MMC/SD 
      or USB mode and display CARD or USB on LCD(When MMC/SD card and USB bar are both 
      inserted into their compartment or socket, the playing mode will be changed into the mode of 
      the latter one), and then play the first track of MMC/SD or USB.
      

      

To remove the front panel from the unit chassis, press the REL key to release the front

      panel from the unit chassis, then pull it up a little to take out from the unit chassis.

      Press this key, a loaded disc can be to ejected.

       Press the CLK button briefly to display time for 5 seconds on the display, and then returns to
       its previous display unless the button is pressed again.
       Then press the CLK button and hold for more than 1 seconds until the real time flashes on the
       display. Then you can adjust HOUR or MINUTE by rotating the VOL knob.  
   

      Press it to scan up by one channel step with station detection. If a valid signal has detected, 
      the current frequency is blinked within 5 seconds, then press it again to stop scan and remain 
      the current frequency; otherwise, the unit continue to scan up by one channel step with station 
      detection 5 seconds later.