New Transducers TR-5001 Manual Do Utilizador

Set the check box (Use Multiple Monitors) to enable multiple monitors mapping. Unchecking 

this box will disable multiple-monitor configuration, and all of the touch panel controllers will 

be mapped to the primary monitor. The gray shadow area is the monitor mapped to the selected 

controller/panel. The button [Mapping]  is used to find the mapping relationships between the 

monitors and touch panel controllers. Press [Mapping] and the software will guide you to 

touch the corresponding monitor to obtain the mapping relationship.

After completing monitor mapping, Press [Apply] to apply the mapping relationship.

To use the Split Monitor function, you need to select which controller you want to launch this 

function, then check the Multiple Monitors box and Split Monitor at the same time as shown 

below. Press the [Split Monitor] button to set up the active area.

It shows the current resolution of the display and you can set the active area by inputting the 

value or use the default button [Upper Half], [Left Half] or [Quarter]. The default value of 

panel resolution should be full screen as Left: 0, Right: 0, Top: 0 and Bottom: 0.

5. ABOUT: General information about TouchKit.

To uninstall, use the TouchKit/Uninstall from the Programs menu on the Start button.