New Balance 8.0e Manual Do Utilizador

7

a) Place the Metal Sleeves over the studs on Foot Tube. Place the longer

(black) Sleeves on center studs.

b) Slide the Foot Platform on the metal sleeves. To secure the Foot 

Platforms, line up holes and insert front and rear M6 x 20mm Phillips
Bolts and M6 Washers. Tighten with the Screwdriver provided.

Feed the Computer and Pulse Wires up
through the Stationary Bar Assembly. Slide
the Stationary Bar Assembly into the top of 
the Vertical Column Tube. Attach with 
the three M8 x 15mm Allen Bolts,
M8 Spring Washers and M8 Curved
Washers. Tighten with the long Allen
Wrench that is provided.

Insert Dual-Action Handlebars into the 
corresponding Swing Arms. Secure using 
four M8 Carriage Bolts, M8 Washers and 
M8 Acorn Nuts. Tighten Bolts with the 
Wrench provided.