New Balance 5K 5100 Manual Do Utilizador

a) Align the Rear Foot Tube with 

Levelers with the rear of the Main
Frame Assembly. Make sure the
square holes in the Rear Foot Tube
are on the outside. Insert Carriage
Bolts from fastener pack through 
the Rear Foot Tube with Levelers
and Main Frame Assembly. Secure
with Curved Washers and Nuts also
from the fastener pack. Tighten 
with the Wrench provided.

b) Repeat on the front of the unit

using the Front Foot Tube with
Wheels. Make sure wheels are 
facing forward (away from the unit)
during assembly.

a) Attach the Wire Connector from the Main

Frame Assembly to the Wire Connector
coming out the bottom of the Computer
Tube. Computer Tube should angle down
towards the front of the unit as shown.

b) Insert the Computer Tube into the front 

of the Main Frame Assembly tucking the
wires down into the Main Frame Assembly.
Be careful not to pinch the wires. Gently
pull the wires up from the top of the
Computer Tube to prevent any slack in
the wires at the base of the Computer
Tube.

Secure the Computer Tube in place 
with the four allen bolts and washers 
from the fastener pack. Tighten with 
the Allen Wrench provided.

main frame

assembly

carriage bolt

rear 
foot 

tube

leveler

acorn nut

washer

front 

foot

tube

carriage bolt

computer

tube

main frame

assembly

allen bolt

washer

wire

connector

wheel

6