National Instruments Welding System 321645c-01 Manual Do Utilizador
Chapter 2
Function Reference — CTR_Restart
©
National Instruments Corporation
2-107
NI-DAQ FRM for PC Compatibles
CTR_Restart
Format
status = CTR_Restart (deviceNumber, ctr)
Purpose
Restarts operation of the specified counter.
Parameters
Input
Parameter Discussion
ctr is the counter number.
Range:
1, 2, or 5 for an MIO device except the E Series devices.
1 through 10 for a PC-TIO-10.
1 through 10 for a PC-TIO-10.
Using This Function
You can use
CTR_Restart
after a
CTR_Stop
operation to allow the suspended counter to
resume. If the specified counter was never set up for an operation,
CTR_Restart
returns an
error.
You also can use
CTR_Restart
after a
CTR_Pulse
operation to generate additional pulses.
CTR_Pulse
generates the first pulse. In this case, do not call
CTR_Restart
until after the
previous pulse has completed.
Name
Type
Description
deviceNumber
i16
assigned by configuration utility
ctr
i16
counter number