KVH Industries FB250 Manual Do Utilizador
Chapter 4: Using the web interface
92
Setting up the interfaces
Configuring the ISDN interface
To configure the ISDN interface, do as follows:
1. Select SETTINGS > ISDN.
2. Set the call type(s) for incoming calls.
You can select Standard, 3.1 kHz Audio, UDI and/or RDI. Note that for
TracPhone FB250 you can only select Standard or 3.1 kHz Audio.
TracPhone FB250 you can only select Standard or 3.1 kHz Audio.
Note
For information on how to set up call services (supplementary
services), see Setting up call services on page 97. These settings
apply to both the Phone/Fax interface, the ISDN interface and the
LAN w. PoE interface.
services), see Setting up call services on page 97. These settings
apply to both the Phone/Fax interface, the ISDN interface and the
LAN w. PoE interface.
Note
Connected devices will only receive incoming calls with the call
types that are selected here.
For example, if only Standard is selected, and a G4 fax call
(using call type UDI) arrives, a fax connected to the ISDN port
will not receive the incoming call.
types that are selected here.
For example, if only Standard is selected, and a G4 fax call
(using call type UDI) arrives, a fax connected to the ISDN port
will not receive the incoming call.
BGAN-X_UM.book Page 92 Wednesday, April 30, 2008 12:48 PM