KYOCERA KR1 Manual Do Utilizador

Troubleshooting

43 

If other troubleshooting methods have failed, you may choose to 

 the Kyocera KR1 Mobile Router to its factory 

default settings.

To hard-reset the Kyocera KR1 Mobile Router its factory 

 settings, follow the steps listed below:

1. Ensure the Kyocera KR1 Mobile Router is powered on

2. Locate the 

 button on the back of the Kyocera KR1 Mobile Router.

3. Use a paper clip to press the 

 button.

4. Hold for 10 seconds and then release.

5. After the Kyocera KR1 Mobile Router reboots, it is reset to the factory 

 settings. 

Please note that this process will take a few minutes.

•

VPN stands for “Virtual Private Networking.” VPNs create a "tunnel" through an existing Internet connection 
using PPTP (Point-to-Point Tunneling Protocol) or IPSec (IP Security) protocols with various encryption 
schemes including Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) .

•

This feature allows you to use your existing Internet connection to connect to a remote site with added 
security. 
If your VPN connection is not functional, verify that your VPN dial-up configuration is correct. 

This information should be provided to you from your VPN provider.

Pressing the Reset Button 
restores the KR1 to its 
original factory 

 settings.