Korg TONEWORKS AX5G Manual Do Utilizador
13
AX5G Owner’s manual
2. No sound
❑
Is the volume of your guitar turned down?
❑
Is your guitar cable connected correctly?
❑
Is your guitar cable broken?
❑
Are the DRIVE/AMP or PROGRAM LEVEL (LEVEL/NR/CAB/
PEDAL) parameters turned to a low value?
PEDAL) parameters turned to a low value?
❑
Is the volume turned down for another effect?
❑
If VOLUME is assigned as the control target of the expression
pedal, could you have turned the volume down?
pedal, could you have turned the volume down?
❑
Is the Mute function activated? Refer to “Bypass and Mute” (p.10)
and cancel the Mute function.
and cancel the Mute function.
❑
Is the master volume turned down? Set the function selector to
[PROGRAM], and turn the value knob to adjust the master volume.
[PROGRAM], and turn the value knob to adjust the master volume.
3. Effects don’t apply
❑
Could an effect be bypassed?
❑
Is the modulation “DEPTH” or the delay/reverb “MIX” set to a low
value?
value?
❑
Is the AX5G in Bypass mode? Refer to “Bypass and Mute” (p.10)
and cancel the Bypass function.
and cancel the Bypass function.
4. High frequencies are distorted when using ACOUSTIC
(AC SIM)
❑
Are you applying too much drive? Lower the DRIVE/AMP [GAIN]
setting.
setting.
❑
Are you using a guitar that has high output humbucking pickups?
Lower the volume of your guitar.
Lower the volume of your guitar.
5. Sound connected to the guitar amp is distorted, or
sounds wrong
❑
Is the AMP parameter “P5” (AMP/LINE) set to “ Ln ” (LINE)? Change
the AMP parameter “P5” (AMP/LINE) setting to “A1”–“A3” (AMP).
the AMP parameter “P5” (AMP/LINE) setting to “A1”–“A3” (AMP).
❑
Is the DRIVE/AMP [VOLUME] setting or the PROGRAM LEVEL
(LEVEL/NR/CAB/PEDAL) [LEVEL] setting raised excessively?
(LEVEL/NR/CAB/PEDAL) [LEVEL] setting raised excessively?
Specifications
Number of effects:
Pre-effect types: 11
(Pre-effect 10 + Pedal-wah 1)
Drive/Amp Model types: 16
Cabinet Model types: 10
Modulation Effect types: 10
Delay Effect types: 5
Reverb Effect types: 5
Noise Reduction: 1
(Pre-effect 10 + Pedal-wah 1)
Drive/Amp Model types: 16
Cabinet Model types: 10
Modulation Effect types: 10
Delay Effect types: 5
Reverb Effect types: 5
Noise Reduction: 1
Number of programs:
80 (40 user/40 preset)
Audio input:
1/4” (mono)
Audio output:
1/4” (stereo TRS)
Signal processing:
A/D conversion: 24 bit
D/A conversion: 24-bit
D/A conversion: 24-bit
Sampling frequency:
31.25 kHz
Tuner:
Detection range : A0–E6
Calibration:
A=438–445 Hz
Power supply:
Four alkaline AA batteries (continuous use
of eight hours) or DC9V (separately sold)
AC adapter
of eight hours) or DC9V (separately sold)
AC adapter
Dimensions (W
✕
D
✕
H):
249
✕
143
✕
44 mm /
9.8
✕
5.6
✕
1.7 inches
Weight:
650 g / 22.9 oz.
Included items:
Owner’s manual
Options (separately sold):
DC9V AC adapter
* Specifications and appearance are subject to change without notice for improve-
ment.