Klark Teknik U.S.A. Stereo Receiver DN530 Manual Do Utilizador
Soloing
DN530
Operator Manual
Operator Manual
23
Soloing
You can monitor the sidechain during the performance using the dedicated solo output.
To do this, connect the solo output to a spare input channel, line return, effects return
etc., on your mixing console. Enabling any solo pushbutton will route that processor’s
sidechain monitor to the solo output, allowing monitoring of the sidechain filter without
interrupting the audio output of the processor.
To do this, connect the solo output to a spare input channel, line return, effects return
etc., on your mixing console. Enabling any solo pushbutton will route that processor’s
sidechain monitor to the solo output, allowing monitoring of the sidechain filter without
interrupting the audio output of the processor.
The rear panel of the DN530 includes a solo bus with input and output XLRs. This
allows multiple units to be linked in series, so that a group of units can all apply a solo
signal to a common solo bus. The final solo bus output will be taken from the last unit
in the chain.
allows multiple units to be linked in series, so that a group of units can all apply a solo
signal to a common solo bus. The final solo bus output will be taken from the last unit
in the chain.
In the following example, four units are daisy-chained, although you can have any
number you want.
number you want.
Figure 3: Daisy-chaining the DN530s (solo bus)
Final solo bus
output
Solo input