Kenwood CX-SR10 Manual Do Utilizador
Shortening the antenna "tail"
The antenna module is supplied with a 6 inch tail. For vehicles with flat roofs (SUVs,
Mini-vans) and for convertibles, it is possible to shorten the tail by up to 2 inches.
NOTE: For vvehicles w
Mini-vans) and for convertibles, it is possible to shorten the tail by up to 2 inches.
NOTE: For vvehicles w
with aa ssloping rroof, oor iif tthe m
module iis m
mounted oon tthe ttrunk oof aa
convertible, tthe ttail sshould nnot bbe sshortened!
Figure 4: Shortening the antenna tail
After the precise length of the tail has been determined, the adhesive strip may be
cut to length and applied to the antenna tail.
cut to length and applied to the antenna tail.
Figure 5: Applying adhesive tape
Removing the antenna
The antenna module may be removed, using a nylon cord (e.g. fishing line) to cut
through the adhesive pad between the antenna module and the vehicle. Work from
the front to the tail in a side-to-side cutting motion. Any remaining adhesive may be
removed with an appropriate cleaner.
through the adhesive pad between the antenna module and the vehicle. Work from
the front to the tail in a side-to-side cutting motion. Any remaining adhesive may be
removed with an appropriate cleaner.
Figure 6: Removing antenna
5