Kenwood DNN991HD Guia De Configuração Rápida

4

  

ñ  English

 

Ñ Acquiring GPS signal

The first time you turn on this unit, you must wait 
while the system acquires satellite signals for the 
first time. This process could take up to several 
minutes. Make sure your vehicle is outdoors in an 
open area away from tall buildings and trees for 
fastest acquisition.
After the system acquires satellites for the first time, 
it will acquire satellites quickly each time thereafter.

 

Ñ About the front panel

When removing the product from the box or 
installing it, the front panel may be positioned 
at the angle shown in (Fig. 1). This is due to the 
characteristics of mechanism the product is 
equipped with.
When the product is first powered on works 
properly, the front panel will automatically move 
into the position (initial setting angle) shown in 
(Fig. 2).

(Fig. 1)

(Fig. 2)

 

Ñ Cleaning The Unit

If the faceplate of this unit is stained, wipe it with a 
dry soft cloth such as a silicon cloth. If the faceplate 
is stained badly, wipe the stain off with a cloth 
moistened with neutral cleaner, then wipe it again 
with a clean soft dry cloth.

 

!

CAUTION

•  Applying spray cleaner directly to the unit may 

affect its mechanical parts. Wiping the faceplate 
with a hard cloth or using a volatile liquid such as 
thinner or alcohol may scratch the surface or erase 
screened print.

 

Ñ How To Reset Your Unit

If the unit or the connected unit fails to operate 
properly, reset the unit.

The unit returns to factory settings.

6

 

✎

NOTE

•  Disconnect the USB device before pressing the 

<Reset> button. Pressing the <Reset> button with 
the USB device connected can damage the data 
stored in the USB device. For how to disconnect the 
USB device, see  How to Play Music (P.15).

•  When the unit is turned on after resetting, the Initial 

SETUP screen appears. See  First Step (P.7).