Juniper Networks fi-6000NS Manual Do Utilizador
166
4. Press the [OK] button.
⇒
This returns you to the "Save" screen.
5. In the "Save as:" field, enter a file name for the scanned data to be saved.
File names may be up to 128 characters long.
By default, "Scanner Name" + "Scan Date/Time" is entered.
By default, "Scanner Name" + "Scan Date/Time" is entered.
6. Select if existing files with the same name are to be overwritten.
The default setting is [No].
If a file name already exists on the network, the existing file will not be overwritten and the
scanned data will be lost. Whether or not the file was successfully saved can be checked in
the user log.
For more details about accessing the user log, refer to"4.10 Checking the User Log" (page
205).
If a file name already exists on the network, the existing file will not be overwritten and the
scanned data will be lost. Whether or not the file was successfully saved can be checked in
the user log.
For more details about accessing the user log, refer to"4.10 Checking the User Log" (page
205).
HINT
User authentication may sometimes be required to access the file server.
If authentication is required, the "Folder Server Authentication" screen
appears. The authentication procedure is as follows.
If authentication is required, the "Folder Server Authentication" screen
appears. The authentication procedure is as follows.
1. Enter a "User Name" and "Password" for the file server.
2. Press the [OK] button.
ATTENTION
The following file names cannot be used:
•
CON
•
PRN
•
AUX
•
CLOCK$
•
NUL
•
COM0 to COM9
•
LPT0 to LPT9