jWIN JT-P551 Manual Do Utilizador

www.jWIN.com 

Telephone will ring to alert the user of an incoming call. 

1.  When there is an incoming call, pick up the handset or press [SPEAKER] 

to receive the call. 

 
2.  You may also use pendant remote to pick up the call. When there is an 

incoming call, just press the button of the pendant remote and the 
telephone will be put in speakerphone operation. 

 

3.  After finishing the conversation, press and hold the button of the pendant 

remote again for a few seconds to terminate the call and the telephone will 
be returned to on-hook state. 

Press [▲] or [▼] to review incoming calls (up to 60 calls). 

1. Press 

[▲] or [▼] to find the number you wish to erase. 

 
2. Press 

[DEL] to erase the number from the list. 

 

 
3. Press 

[DEL] for approximately 3 seconds for the LCD to show “ERASE 

ALL?” 

 
4. Press 

[DEL] again to erase the entire caller ID list. 

In on-hook state: 

1. Press 

[▲] or [▼] to select the desired caller ID record. 

 
2.  If the record is less than 10 digits, press [OK/DIAL] once, pick up the 

handset and the displaying number will be dialed out automatically. 

 

3.  If the record is 10 digits and the first 3 digits of the record is the same as set 

area code, press [OK/DIAL], the three digits area code will be erased and it 
will display 7 digits number only. The LCD will display “PICK UP OR ADJ”. 
Press [OK/DIAL] again to return back to 10 digits with adding area code. 
Press [OK/DIAL] once again to show 11 digits with adding ‘1’ as the first 
digits and area code as well. Pick up the phone and the number will be 
dialed out automatically.