Multi-Tech Systems MULTIVOIP MVP210/410/810 Manual Do Utilizador

Chapter 5: Phonebook Configuration 

Multi-Tech 

Systems, 

Inc. 

     

 

 

79 

5. In the “Destination Pattern” field of the Add/Edit Outbound Phonebook screen, enter the digits from step 

4 followed by the digits from step 3. 

Seattle/Chicago system. 

: enter 81312 as 

Destination Pat-tern in 
Outbound Phone-book of 
Seattle VOIP. 

London/Birmingham system. 
Leading zero of Birmingham area 
code is dropped when combined 
with national-dialing access 
code. (Such practices vary by 
country.) 

: enter 90121 as 

Destination Pattern in Outbound 
Phonebook of London VOIP. 
Not 900121. 

Rotterdam/Bordeaux system. 

: enter 903305 as 

Destination Pattern in 
Outbound Phonebook of 
Rotterdam VOIP. 

6. In the “Remove Prefix” field, enter the initial PBX access digit (“8” or “9”).   

Seattle/Chicago system. 

: enter 8 in “Remove Prefix” 

field of Seattle Outbound 
Phonebook.

 

London/Birmingham system. 

: enter 9 in “Remove Prefix” 

field of London Outbound 
Phonebook.

 

Rotterdam/Bordeaux system. 

: enter 9 in “Remove Prefix” 

field of Outbound Phonebook for 
Rotterdam VOIP.

 

Note: Some PBXs will not ‘hand off’ the “8” or “9” to the VOIP.  But for those PBX units that do, it’s important to enter 

the “8” or “9” in the “Remove Prefix” field in the Outbound Phonebook.  This precludes the problem of having to make 
two inbound phonebook entries at remote VOIPs, one to account for situations where “8” is used as the PBX access 
digit and another for when “9” is used.

 

7. In the “Protocol Type” field group, select the VOIP protocol that you will use (H.323, SIP, or SPP).  Use the 

appropriate screen under Configuration | Call Signaling to configure the VOIP protocol in detail. 

8. Click OK to exit from the Add/Edit Outbound Phonebook screen.