MINOLTA CF910 Manual De Manutenção

Please call tech. service.
code: XXXXX

The copier malfunctioned and is 
unable to make copies.

Call and inform your Technical 
Representative of the code being 
shown on the Touch Panel.

Input your 4-digit Access Code 
Number, and press OK.

An access number has been set 
and the number assigned for your 
own department must be entered 
before you can make a copy.

Enter the 4-digit access number. 
(“Access Number”  ☞ p. 2-11)

Please insert the Key Counter.

The Key Counter is not plugged 
in and the copier is unable to 
make copies.

Plug in the Key Counter.

Load paper in the XXXXX Tray. The currently selected Tray has 

run out of paper.

Load the Tray with paper.
☞ p. 6-1

Please add XXXX Toner. 
Follow the label inside the front 
door.

Toner has run out and the copier 
is unable to make copies.

Replenish toner. ☞ p. 6-3

Toner is soon running out.

The Staple Cartridge is empty. 
Please replace with a new one.

The staples have run out.

Replace the Staple Cartridge with 
a new one. ☞ p. 6-5

Misfeeding is detected. Please 
remove paper at 

.

A misfeed has occurred and no 
copy cycle can be initiated.

Clear the misfed sheet of paper. 
☞ p. 6-7

The section indicated by ➜ is 
open. Please close it properly.

A copier door is left open or an 
option is not attached properly 
and the copier is unable to make 
copies.

Close the door or cover and attach 
the option properly.

The Fuser Oil has run out.
Please call your technical rep.

The Fuser Oil needs to be 
replenished.

Please call your technical 
representative.

The Fuser Oil has run out. Please 
replenish.

The Fuser Oil has run out and the 
copier is unable to make copies.

Please Replenish the Fuser Oil. 
☞ p. 6-15

Toner Collecting Bottle is nearly 
full. 
Please call your tech. rep.

The Toner Collecting Bottle is 
full and the copier is unable to 
make copies.

Please call your technical 
representative.

Copies remain in the Duplex 
Unit.
Press START to feed them out.

A copy or copies are left in the 
Duplex Unit and the copier is 
unable to make copies.

Press the Start Key to remove all 
copies from the Duplex Unit.

Sorter has reached its capacity. 
Please remove all copies from 
bins first.

Sorter has reached its capacity.
Remove all copies from the bins 
first.

Remove all copies from the Sorter 
Bins.