MINOLTA CF910 Manual De Manutenção

Página de 206
2-9
Gettin
g
 to
 Kn
o
w
 Y
o
ur
 C
o
p
ier
Chapter 2
5. Turning ON and OFF and Initial Mode
Turning ON and OFF
• Turning Copier ON
Press the Power Switch to the 
 (ON) position.
• Turning Copier OFF
Press the Power Switch to the 
 (OFF) position.
When Copier is Turned ON
When the Power Switch is turned ON, the message “Warming-up. Pre-program a job.” appears on the 
Touch Panel and the copier now enables its auto copy start function.
Auto Copy Start Function ☞ p. 2-10
Pressing the Start Key at this point does not start a copy cycle. You’re going to have to wait for approx. 9 
minutes (at an ambient temperature of 20°C/68°F).
Initial Mode
When the Power Switch is turned ON, the Basic screen appears on the Touch Panel. The settings on this 
screen are called the initial mode. The Basic screen serves as the reference for all panel settings to be later 
made.
No. of copies selected
:1
Zoom
:
×
 1.000
Paper
:Auto Paper
Density
:Manual Expo.
Input  
Output
:1  
1
Finishing
:Non-Sort
Useful Tip
The initial mode can be changed. For details, see Setting the Utility Mode. 
 p. 5-1
Note on making multiple copies
If the fusing temperature drops excessively during a multi-copy cycle, there is a possibility that the 
copying speed will be reduced. The copying speed will automatically return to normal when the fusing 
temperature rises enough to ensure good fusing performance.
1144O006AA
1154P541CA