Cisco HWIC Access Point Interface Card HWIC-AP-AG-E= Ficha De Dados
Códigos do produto
HWIC-AP-AG-E=
Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 8
Cisco HWIC-AP WLAN Module for Cisco 1800 (Modular),
Cisco 2800 and Cisco 3800 Series Integrated Services
Routers
Cisco 2800 and Cisco 3800 Series Integrated Services
Routers
Product Overview
The Cisco HWIC-AP 802.11G and HWIC-AP 802.11A/B/G are Wireless LAN interface cards in the
HWIC (High-Speed WAN Interface Card) form factor providing integrated Access Point
functionality in the Cisco 1800 (Modular), Cisco 2800, and Cisco 3800 Integrated Services
Routers. Enterprise branch office and small-to-medium business customers can run concurrent
services of Layer 3 routing, security, Layer 2 switching and now IEEE 802.11 wireless LAN
functionality in a single platform. This combination offers ease of configuration, deployment, and
management while delivering high performance, security and rich set of services.
The Cisco 802.11 WLAN Interface Card provides Cisco 1800 Modular, 2800 and 3800 Integrated
Services Routers the following:
●
Integrated Secure WLAN Access Point Functionality for Cisco's Modular Integrated
Services Routers
●
Single Band 802.11b/g or Dual Band 802.11a/b/g radios
●
Support for fixed or external dipole or dual mode antennas
●
Extensive WLAN Security Capabilities:
◦
WEP, TKIP, Key Management
◦
WAP2/AES
◦
802.1X
◦
LEAP, PEAP, EAP-TLS, EAP-FAST, EAP-TTLS, EAP-SIM, EAP-MD5
◦
Multiple VLAN support
◦
AAA Radius/Accounting
Table 1.
High Speed Wireless Interface Card Models
Part Number
Description
HWIC-AP-G-x
IEEE 802.11 B/G Access Point HWIC (High Speed WLAN Interface Card)
HWIC-AP-AG-x
IEEE 802.11 A/B/G Access Point HWIC (High Speed WLAN Interface Card)
The x denotes one of the following: A = Americas (FCC) for HWIC-AP-G-x and B= Americas (FCC) for HWIC-
AP-AG-x, E = Europe (ETSI), J = Japan (Telec 2.4 GHz) P = Japan (Telec 5GHz) N= 5Ghz Australia/NZ
AP-AG-x, E = Europe (ETSI), J = Japan (Telec 2.4 GHz) P = Japan (Telec 5GHz) N= 5Ghz Australia/NZ
The HWIC-AP-G-x has one onboard radio operating in the 2.4 GHz band meeting IEEE 802.11b
and 802.11g standards. It supports data rates of up 54 Mbps with three non-overlapping channels.
The HWIC-AP-AG-x comprises of 2 individual onboard radios for simultaneous 5 GHz IEEE
802.11a and 2.4GHz IEEE 802.11b/g operation. Each radio supports data rates of up to 54 Mbps
and up to fifteen non-overlapping channels (pending country specific regulatory approvals) which
simplifies deployments for high capacity wireless networks. Both models feature 802.11g radios