Midland Radio RG2W or RG2B Manual Do Utilizador
Page 12
3.5 Installation of the antenna/electromagnetic exposure
For optimal radio settings and minimal user exposure to electromagnetic radio
frequency energy, ensure that:
frequency energy, ensure that:
•
The antenna is connected to the transceiver and is properly installed.
•
The antenna is situated away from people and is positioned at least three feet
from the transceiver and microphone.
from the transceiver and microphone.
•
The connector is a standard PL259 (male UHF).
3.6 Mounting of Microphone
To install the microphone mount, look first for a mounting point close to the
transceiver. The distance between the transceiver and the wall mount must be less
than the length of the microphone cable.
transceiver. The distance between the transceiver and the wall mount must be less
than the length of the microphone cable.
,
Do not pull excessively on the microphone cord.
This part is important to the correct operation of
the radio: over time, pulling may damage the cord
and impede the user from transmitting.
This part is important to the correct operation of
the radio: over time, pulling may damage the cord
and impede the user from transmitting.