Midland Radio RG2W or RG2B Manual Do Utilizador

Página de 30
Page 5 
1.4 Assistance 
We urge you to write the serial number of your transceiver in the space provided 
below.  This number is found on the back panel of the transceiver and will be useful 
in the event of repair/assistance and/or loss and/or theft. 
 
 
 
 
Serial number _______________________ 
____________________________________________ 
IN CASE OF EMERGENCY 
If you have need of assistance, contact other vessels and the Coast guard by 
sending a distress signal on Channel 16. 
  
 
 
 
 
 
 
 
 
Or transmit your distress call using Digital Selective Calling on channel 70. 
 
 
 
 
 
 
 
 
 
 
1.5 Manual 
Notes 
Writing of this manual has been completed with the intention of supplying information 
that is comprehensive, precise and up-to-date.  Nevertheless, Midland does not 
assume responsibility for the actual correspondence with the product and for the 
consequences of possible errors caused by factors over which it has no control.  
Equipment and options described may differ according to varying countries. 
USING CHANNEL 16 
DISTRESS CALL PROCEDURE 
1. “MAYDAY 
MAYDAY 
MAYDAY.” 
2.  “THIS IS ………….” (name of vessel) 
3.  Your callsign or other indication of the vessel (and 9-digit DSC 
ID if you have one. 
4.  “LOCATED AT …………” (your position) 
5.  The nature of the distress or assistance required. 
6.  Any other information which might facilitate the rescue. 
USING DIGITAL SELECTIVE CALLING (ch70) 
DISTRESS CALL PROCEDURE 
1.  While holding aside the key cover, press the DISTRESS key. 
2.  Repeat pressing soft key “Undefined” to select the type of 
distress. 
3.  Holding aside the key cover, press and hold the DISTRESS key 
for 5 seconds until you have heard 5 beeps. 
4.  Wait for an acknowledgement from  a coast station.  Channel 
16 is automatically selected. 
5.  Press PTT and transmit the information listed above. 
 NOTE                                                    
 
A WARNING STICKER is supplied with this transceiver.   To comply 
with FCC regulations, this sticker must be affixed in such a location 
as to be readily seen from the operating controls of the radio as in the  
diagram below.  Make sure the chosen location is clean and dry 
before applying the sticker.