Microboards Technology GX Auto Printer Manual Do Utilizador

 

The  Ink Levels show how much 
remains of all 3 colors, Cyan, 
Magenta and Yellow. 

NOTE: If you place a used 
cartridge in the GX Auto Printer, 
the ink level may not be reported 
correctly.  If the GX Auto Printer 
can identify the cartridge, it may 
report the correct ink levels; if 
not, it will assume that the ink 
cartridge is new and will show 
ink levels of 100%. 

Before each disc is printed, the ink levels are checked.  If the level of any one color is has reached 
10%, a warning message will be displayed on your PC and printing will be temporarily suspended.  
You can either change the cartridge at this point and click OK, or click OK to continue printing using 
the same cartridge.   

If you continue with the same cartridge, printing will continue uninterrupted until the ink level reaches 
5%.  The low ink level warning will be displayed once more.  Again, either change the cartridge or 
continue.   

Once the ink level reaches 3% or less, the warning will be displayed before each print. 

The Ink Cartridge information includes the re-order part number for the cartridge. 

 

Alignment values will move the print 
image on the disc.  Use the graphic on the 
right side of the tab as a guideline in how 
alignment values should be adjusted. 

The  Resolution setting should always be 
set at 

 for best results. 

The  Outer and Inner  Diameters will 
change the size of the area to be printed.  
To avoid excessive ink buildup, these 
values should never be set so that the GX 
Auto Printer is printing off the media. 

The default diameter settings are 

 for 

the  Outer and 

 for the Inner when the 

resolution is at 

.  For hub-printable 

media, the Inner diameter should be 
reduced. 

 

 

The About tab provides you with contact information for the worldwide Microboards offices.