Mermaid Technology 190 Manual Do Utilizador
mermaid ActiveMedia Users Manual ver 2.0
3. Operation
Compact Flash/CF card replacement:
Always turn off the monitor before removing or inserting a CF card!
• Turn off the monitor unit by means of the power
switch, located in the “well” on the backside. (1)
1
3
2
• Gently pull out the CF card in the direction of
arrow (2)
• Gently insert new/replacement CF card with the
label face pointing upwards and the pinhole
connector pointing into the slot.
connector pointing into the slot.
• Turn on the monitor by means of the power switch.
The playback will start within a few seconds.
• Press “Auto-Config” in order to let the monitor
position the new content properly. (3)
Operating the unit – FlashPlayer part:
The ActiveMedia monitor consists of two individually controlled units:
1. A 4-button operated monitor unit.
2. A remote controlled Flash Player.
2. A remote controlled Flash Player.
Infrared eye
• In order to control the FlashPlayer, the
remote control unit must be pointed
directly against the infrared eye located in
the well on the backside.
directly against the infrared eye located in
the well on the backside.
• In order to ease up operation, a pinhole is
located on the lower left side of the unit
(seem from the front). To operate the
Player by means of this hole, the
transmitter diode on the remote control
unit must be pointed directly into this hole.
(seem from the front). To operate the
Player by means of this hole, the
transmitter diode on the remote control
unit must be pointed directly into this hole.
Pinhole
Pinhole
P/N: 20-1700-00460 Page 7 of 24