Kenwood Network Router KRK-11 Folheto

KRK-11

HANDHELD CONTROL HEAD INTERFACE KIT

INSTRUCTION MANUAL

© B62-2102-00 (M)

・

  This is an optional accessory for the KCH-16.

・

  You can connect an external speaker to the interface box.

Interface Box

−

1

Main body panel assembly

−

1

Ground cable

E30-3085-XX

1

Retaining band

J61-0307-XX

1

Retaining bracket

J21-4354-XX

2

Connector

E59-0426-XX

1

Screw set

N99-2069-XX

1

Screw set

N99-2070-XX

1

Instruction manual

B62-2102-XX

1

Main body panel assembly

Screw set : N99-2069-XX

(For Interface box)

Interface box

Ground cable

Retaining band

Retaining bracket

Screw set N99-2070-XX

(For Main body panel assembly)

Connector

Note:
◆

   The following instructions are for use by your Kenwood dealer, an 

authorized Kenwood service facility, or the factory.

◆

   Refer to the Service manual for detailed information regarding the 

installation of the KCH-16.

The following tools and parts are required for installing the handheld 

control head interface kit.

・

  Phillips No. 2 screw driver

・

  KCT-22 Remote Control Cable

Remote Control 

Cable

Note:
◆

   When connecting the KCH-16 to the Interface box, do not connect 

the MIC to the programming connector of the Interface box.

◆

   The programming connector of the interface box is dedicated to 

programming.

◆

   The control connector of the interface box is dedicated to the 

KCH-16; do not use this connector for other equipment.

◆

   The optional jack is supplied for future expansion. It cannot be used 

at this time.

◆

   Do not remove the covers or caps of connectors that are not 

currently being used.

◆

   After connecting the KCH-16 and turning on the power, do not 

remove the KCH-16. 

 

Ignition Sense Cable