Matrox Electronic Systems G450 MMS Manual Do Utilizador
6
Matrox G450 MMS – User Guide
Your Matrox card is now installed. Restart your computer and install your Matrox software (
).
Note:
Monitors are numbered consecutively based on which
connector each is attached to. Numbering starts with the primary
display – the one that first displays information when you restart your
computer. If another graphics card is installed in your computer,
display numbering may be different.
display – the one that first displays information when you restart your
computer. If another graphics card is installed in your computer,
display numbering may be different.
Note:
To connect a digital monitor (a
monitor that uses digital input, usually a
flat panel monitor) to your Matrox
product, your monitor must have a DVI
connector.
flat panel monitor) to your Matrox
product, your monitor must have a DVI
connector.
Some monitors with DVI connectors
support both digital and analog input. If
you’re using one of these monitors with
your Matrox product, make sure it’s configured to use the correct type of input. For more
information, see your monitor documentation.
support both digital and analog input. If
you’re using one of these monitors with
your Matrox product, make sure it’s configured to use the correct type of input. For more
information, see your monitor documentation.
DVI connector
(digital)
HD-15 connector (analog)
DVI connector
(analog/digital)