Matrox Electronic Systems Matrox Triplehead2go T2GDP3DIF Manual Do Utilizador

This section describes how to connect up to three (3) analog or digital monitors to your Matrox 
product. 

„

To connect three (3) monitors, 

.

„

To connect two (2) monitors, 

To avoid possible problems that could damage your monitors or prevent you from using your Matrox 
product, read the following guidelines before connecting your Matrox product.

„

Whenever you change your connection setup, make sure you’re using the correct 
connectors and that all connectors are properly fastened.

„

Don’t change monitor connections while your computer is turned on. While your 
computer is turned on, it may be using monitor settings that are specific to the current 
monitor connections. Some devices may be permanently damaged if incorrect settings 
are used.

„

To get the most out of your Matrox product, we recommend you use three (3) identical 
monitors (that is, monitors that support the same settings such as display resolution and 
refresh rate). For information on the settings your monitor supports, see your monitor 
documentation.

„

While using the DVI input connector on your Matrox product, the highest display 
resolutions are available only with graphics hardware that supports dual-link DVI. For 
information on the capabilities of your graphics hardware, see its documentation. For 
more information on your Matrox product, 

.

 To purchase any cables or adapters not included with your Matrox product, see the 

Matrox online store (

).