Matrox Electronic Systems II Manual Do Utilizador

Página de 136
Installing the Matrox Meteor-II MJPEG module      31
10. Turn on your computer.
Under Windows 98, when you boot your computer, 
Windows’ Plug-and-Play system will detect a new PCI card 
and you will be asked to assign a driver to it. At this point, 
you should click on Cancel because the driver will be 
installed during the installation of MIL or one of its 
derivatives.
Installing the Matrox Meteor-II MJPEG 
module
Matrox Meteor-II MJPEG module is available in two form 
factors: one for use with PCI and CompactPCI form factors, and 
one for use with the PC/104-Plus form factor. The module is 
supported on Matrox Meteor-II /Standard and /Multi-Channel.
PCI and CompactPCI 
form factors
1. Position the boards such that the male connector on the 
module is aligned with the female connector on the base 
board and the female connector on the module is aligned 
with the male connector of the base board. 
PCI connector
MJPEG module
Meteor-II board