Maxon Telecom MM-5100 Manual Do Utilizador
MM-5100 Windows Setup Manual 090803 NZ
Page 28 of 44
4/09/2003
8.4.1. Change MM-5100 Modem Properties
This section is applicable to both the Serial and USB modems. It deals with the different
settings required for QNC or 1x Packet Connection (for Fax settings please refer to next
chapter):
For QNC Connection, type “AT+CRM=131”.
For 1x Packet Connection, type “AT+CRM=150”.
Then Click ‘OK’ Button.
settings required for QNC or 1x Packet Connection (for Fax settings please refer to next
chapter):
For QNC Connection, type “AT+CRM=131”.
For 1x Packet Connection, type “AT+CRM=150”.
Then Click ‘OK’ Button.