MacroSystem Digital Video DVD-Arabesk 2 Manual Do Utilizador

Instead, a background image appears in which 
the films existing on the DVD are represented by 
text. Only the films themselves can be restored.
With the help of “DVD-Arabesk 2” you can 
create a completely new menu. 

Of course the original films remain unchanged.

Warning: Only DVDs with a capacity of 4.7 
GB can be read in. A greater capacity is not 
supported.

To read in a DVD you require an empty DVD 
hard disc section.

If you have not deleted all existing data, then a 
message is issued after you have clicked on the 
“Read DVD” button. If you confirm this message 
with “Ok”, the data will be deleted automatically 
after you have inserted the DVD.

A DVD that has been read in can be written any 
number of times to a DVD-R or RW.

(8) You also have the option to erase a DVD-RW.
Click on the button “Erase DVD RW” and then 
insert a written DVD-RW. When the drive closes, 
the DVD is erased.

Note: With “DVD-Arabesk 2” you can write 
both DVD-R and DVD-RW media. New drives 
also support DVD+R media. (You can find out 
the installed drive and the supported formats 
in the corresponding display in the window 
“Settings”. Further information can be found 
under item (9).) The DVD-R media can only 
be written once and cannot be erased. The 
advantage is that they work without problems 
in most DVD players. DVD-RWs can be erased 
and rewritten, but they are somewhat more 
expensive and do not work with all players.

(9) A click on the button “Settings” opens a 
window in which you can specify the “Write 
Speed”. You have the possibility of specifying 

two different speeds with the help of the 
selection button, “Normal” and “High”.

For DVDs with small data volume the write 
duration can be significantly less than the actual 
film length, even for “Normal” speed.

The setting “High” causes the DVDs to be 
written at a faster rate. 
Whether or not high speed is supported 
depends on several factors, e.g. 

- Casablanca model
- Type of DVD drive
- media used (manufacturer, type)
- firmware

If high speed is to be used, then the DVDs must 
always be high-speed media appropriated for 
high-speed writing. Fast writing is not just a 
factor of high-speed media, because the factors 
listed above also play an important role.

Some DVD players may have a problem playing 
high-speed media.

If high-speed writing is not possible, even 
though it is set, the DVD will automatically be 
written at normal speed.

Warning: Casablanca Avio does not support 
high-speed writing.

In addition, in the window “Settings” you see 
an information field with details on your DVD 
software, hardware, firmware and supported 
media.

(10) With a click on the menu symbol in the 
lower right corner of the “DVD-Arabesk 2” menu 
you return to the “Finish” menu.

Note:  When you exit the program “DVD-
Arabesk 2” you will find yourself in the project 
from which you started “DVD-Arabesk 2”.