Lucent Technologies Definity Enterprise Communication Server 8.2 Manual Do Utilizador
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Routing outgoing calls
188
Modifying call routing
8
4. Move to a blank Dialed String field.
If the dialed string is already defined in your system, the cursor appears in
the appropriate Dialed String field, where you can make changes.
the appropriate Dialed String field, where you can make changes.
5. Enter
1650
in the Dialed String field.
6. Enter the minimum and maximum values from step 2 in the Total Mn and
Total Mx fields.
In our example, enter
11
in each field.
7. Enter the route pattern from step 2 in the Route Pattern field.
In our example, enter
30
.
8. Enter
fnpa
in the Call Type field.
9. Enter the node number from step 2 in the Node Num field.
For our example, leave the node number blank.
10. Press
ENTER
to save your changes.
To add a new prefix, follow the same directions, except use a shorter dial string
(such as
(such as
list ars route-chosen 2223333
, where
222
is the old prefix) and a dial
type of
hnpa
.
Tip:
If you change an existing area code for a network with multiple locations, be
sure to change the Number Plan Area Code field on the Locations screen.
Refer to
sure to change the Number Plan Area Code field on the Locations screen.
Refer to
‘‘Setting up multiple locations’’ on page 182
.
ARS DIGIT ANALYSIS TABLE
Location: all
Percent Full: 6
Dialed
Total
Route Call Node ANI
String
Min Max
Pattern Type Num
Req
1____________________11 11
30
fnpa ___
n
167__________________11 11
30
fnpa ___
n
1800_________________11 11
30
fnpa ___
n
2___________________ 7
7
2
hnpa ___
n
3___________________ 7 7
2
hnpa
___
n
4___________________ 7
7
2
hnpa ___
n
5___________________ 7 7
2
hnpa
___
n
7___________________ 7 7
2
hnpa
___
n
8___________________ 7 7
2
hnpa
___
n
911_________________
3 3
1
emer
___
n
976________________ _11
11
deny
hnpa ___
n