Lucent Technologies Definity Enterprise Communication Server 8.2 Manual Do Utilizador
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
614
DS1 Circuit Pack
17
Alarm When PRI Endpoint Detached
Use this field for DS1 circuit packs connected to Roll-About Video equipment.
This field appears only when the Connect field is
This field appears only when the Connect field is
line-side
.
Field descriptions for page 2
Screen 76.
DS1 Circuit Pack
!
CAUTION:
Customers: Do not change fields on this page without assistance from
Lucent Technologies or your network service provider.
Lucent Technologies or your network service provider.
Page 2 does not appear for all DS1 circuit packs. For those circuit packs that
support it, this page appears only when:
support it, this page appears only when:
■
the version is V3 or greater
■
the Framing Mode field is
esf
or the Near-end CSU Type field is
integrated
.
Valid entries
Usage
y/n
Enter
y
if you want the switch to generate an alarm when the
DS1 board detects a loss of signal (for example, if the video
equipment is disconnected).
equipment is disconnected).
add ds1 xxxxxx
DS1 CIRCUIT PACK
ESF DATA LINK OPTIONS
Network Management Protocol:
DS1 CIRCUIT PACK
ESF DATA LINK OPTIONS
Network Management Protocol:
Send ANSI-T1.403 One-Second Performance Reports?
Far-end CSU Address:
INTEGRATED CSU OPTIONS
Transmit LBO:
Receive ALBO:
Upon DTE LOS:
CPE LOOPBACK JACK OPTIONS
Supply CPE Loopback Jack Power?
INTEGRATED CSU OPTIONS
Transmit LBO:
Receive ALBO:
Upon DTE LOS:
CPE LOOPBACK JACK OPTIONS
Supply CPE Loopback Jack Power?