Lucent Technologies Definity Enterprise Communication Server 8.2 Manual Do Utilizador
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Collecting billing information
440
Collecting information about calls
16
Instructions
In this example, we are going to establish call detail recording for all calls that
come in on trunk group 1 (our CO trunk). We are going to set up CDR so that any
call that is handled by an attendant produces a separate record for the attendant
part of the call.
come in on trunk group 1 (our CO trunk). We are going to set up CDR so that any
call that is handled by an attendant produces a separate record for the attendant
part of the call.
1. Type
change trunk-group 1
and press
RETURN
.
The
Trunk Group
screen appears.
2. In the CDR Reports field, type
y
.
This tells the switch to create call records for calls made over this trunk
group.
group.
3. Press
ENTER
to save your changes.
4. Type
change system-parameters cdr
and press
RETURN
.
The
CDR System Parameters
screen appears.
TRUNK GROUP
Group Number: 1
Group Type: co
CDR Reports: y
Group Name: Outside calls
COR: 85
TN: 1__
TAC: 105
Direction: two-way
Outgoing Display? n
Dial Access? n
Busy Threshold: 99
Night Service: 1234
Queue Length: 0
Country: 1
Incoming Destination: attd
Comm Type: voice
Auth Code? n Digit Absorption List: _
Prefix-1? y Trunk Flash? n
Toll Restricted? y
TRUNK PARAMETERS
Trunk Type: ground start
Outgoing Dial Type: tone
Trunk Type: ground start
Outgoing Dial Type: tone
Cut-Through? n
Trunk Termination: rc
Disconnect Timing(msec): 500_
Auto Guard? n Call Still Held? n Sig Bit Inversion: none
Trunk Gain: high
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 10
Answer Supervision Timeout: 10
Receive Answer Supervision? n