LSI MegaRAID(R) 6 Gb/s SAS RAID Controllers 25083 Manual Do Utilizador
3-4
MegaRAID SAS RAID Controller Characteristics
Copyright © 2009 by LSI Corporation. All rights reserved.
The MegaRAID SAS 9260-8i low-profile SAS/SATA II RAID controller
controls eight internal SAS/SATA ports through two SFF-8087 x4 internal
mini SAS connectors.
controls eight internal SAS/SATA ports through two SFF-8087 x4 internal
mini SAS connectors.
The MegaRAID SAS 9260DE-8i low-profile SAS/SATA II RAID controller
controls eight internal SAS/SATA ports through two SFF-8087 x4 internal
mini SAS connectors and offers data security using disk encryption.
controls eight internal SAS/SATA ports through two SFF-8087 x4 internal
mini SAS connectors and offers data security using disk encryption.
Note:
The SAS 9260-4i RAID controller does not contain the JT7
connector, which supports ports 4–7. The SAS 9260DE-8i
has the same connectors as the SAS 9260-8i.
connector, which supports ports 4–7. The SAS 9260DE-8i
has the same connectors as the SAS 9260-8i.
This subsection provides the board layout, and connector and jumper
information for the RAID controller.
information for the RAID controller.
shows the jumpers and
connectors on the SAS 9260-8i RAID controller.
Figure 3.2
Card Layout for the MegaRAID SAS 9260-8i RAID
Controller
Controller
Note:
JT1, JT2, and JT4 are behind the LSIiBBU07 when the
iBBU is installed, but they are still accessible.
iBBU is installed, but they are still accessible.
describes the jumpers and connectors on the SAS 9260-8i and
9260DE-8i RAID controllers.
85039-04
Port
3-0
Port
7-4
JT10
JT3
JT4
JT2
JT12
JT1
JT8
JT13
JT11
JT9
JT7
JT6