Lowrance electronic LVR-880 EU Manual Do Utilizador
Lowrance - LVR-880 Operation Instructions
12
2-5 PUSH TO SELECT (ENT)
When you are in MENU mode, push the center of the Channel Select knob to ENTER your
choice or setting. This is referred to throughout the manual as “press ENT”.
choice or setting. This is referred to throughout the manual as “press ENT”.
2-6 16/9 - Priority channel (LVR-880US only)
Also on the microphone. Press to cancel all other modes and to tune into the priority channel
on Hi power. Press again to return to your original channel.
The default is Channel 16. To make Channel 09 the default instead, hold down 16/9 until a
beep sounds and 09 is displayed.
The PRi annunciator shows the selected priority channel that will be accessed with a quick
press of the 16/9 key.
press of the 16/9 key.
2-7 16 - Priority channel (LVR-880EU only)
Also on the microphone. Press to cancel all other modes and to tune into the priority chan-
nel, Channel 16, on high power. Press again to return to your original channel.
nel, Channel 16, on high power. Press again to return to your original channel.
2-8 FM (FM Stereo Radio)
Note: You need to select your FM region. This selection specifies the range of the frequency
band and the frequency steps. See Section 4.11.
Press FM to enter FM RADIO mode and tune automatically to the most recent memorized
frequency.
The LCD shows FM and the frequency (in this example, FM 89.70 MHz).
The ST symbol appears if a stereo signal is detected (not shown in this example).
To quickly tune to a different FM radio station, turn the Channel Select knob OR press + or - to
change the frequency.
Press EXIT to return to operational mode.
If you are in FM RADIO mode, you can press ENT to enter SCAN mode. The SCAN symbol
appears on the LCD. Turn the Channel Select knob left or right to move to the next strong
channel. After the channel is selected, press ENT again to exit SCAN mode.