Lowrance electronic LVR-880 EU Manual Do Utilizador

Lowrance - LVR-880 Operation Instructions

39

Select the desired setting then press ENT.

2. 

CHECK SUM ON (on) is the usual setting. The COM PORT uses 4800 baud rate and can 
receive the following GPS data sentences: RMC, GGA, GLL, GNS. Additionally, the radio 
will output the following NMEA DSC data: DSC (for DSC call), DSE (for enhanced position).

This radio can use either NMEA0183 or NMEA2000 protocol to receive GPS data from a 
compatible GPS unit. 

Note: NMEA2000 SOURCE options will appear (up to 4 sources showing the actual source 
name) only if NMEA2000 is operational. 
 

RADIO SETUP

 INT SPEAKER

 COM PORT

GPS SOURCE

 

GPS SOURCE

NMEA0183

 LGC3000

 LCX113CHD

Select 

1. 

RADIO SETUP then GPS SOURCE. (If there is only one NMEA protocol available on 

your vessel, only that will be shown.)
Select 

2. 

the desired NMEA source then press ENT.

RADIO SETUP

 COM PORT

 GPS SOURCE

FM REGION

FM REGION

USA

 EUROPE

 AUS/NZ

FM REGION

 AUS/NZ

JAPAN

 OTHERS

Selec

1. 

t RADIO SETUP then FM REGION. 

Select the FM region and press ENT. If you selected USA, EUROPE, AUS/NZ, or JAPAN, the 

2. 

FM REGION selection is now complete.
If you selected OTHERS, you must also specify the channel spacing, upper frequency, 
and lower frequency.

FM REGION

 AUS/NZ

 JAPAN

OTHERS

OTHERS

CH SPACING

 UPPER FREQ

 LOWER FREQ

CH SPACING

200KHz

 100KHz

 50KHz

Select C

1. 

H SPACING then select the channel spacing.

Select UPPER FREQ then select the upper frequency (between 108.00 and 106.00 MHz). 

2. 

Select LOWER FREQ then select the lower frequency (between 87.50 and 89.50 MHz).

3.