Logic Controls KB5000 Manual Do Utilizador

Send Break-code for scan-codes - Enables or disables the transmission
of break codes for each scan code programmed into the keyboard.

Enable beep while a key pressed - Enables or disables the entire keyboard
from beeping when any key is depressed.

No beep if a key is undefined - If a key is not programmed it will not
beep when depressed.

Translate to code set #2 for AT - Enables or disables the output of the
keyboard to be translated into AT scan code.

Emulating XT keyboard always - Enables or disables the output of the
keyboard to be translated into XT scan code.

Use ALT +num to generate ASCII - Enables or disables the ability to use
the ALT key along with the numeric keyboard to generate ASCII codes.

Enable typematic for scan codes - Enables or disables keys programmed
with scan code information to repeat the programmed characters as long
as the key remains depressed.

Enable typematic for ASCII codes - Enables or disables keys programmed
with ASCII code information to repeat the programmed characters as long
as the key remains depressed.

Emulating Link Terminal - Enables or disables the keyboards ability to
emulate a link terminal.

Intercharacter Delay (+/-) - The time delay between characters can be
adjusted from 1 millisecond to 266 milliseconds.  This delay is set for all
characters programmed into the keyboard.  Do not confuse this feature
with the inter-string delay feature.

18