LOEWE Individual Sound Projector Manual Do Utilizador

3 - 

Select the sound field programme Music. By pressing several 
times, select the programmes Music Video, Concert Hall and 

Jazz Club.

Select the sound field programme Film. By pressing several 
times, select the programmes Sci-Fi, Spectacle and Adven-

ture.

Select the sound field programme Sport.

Switch off the sound field programme.

56

 Press briefly. DSP LEVEL appears on the display.

34

 Set level within 4 seconds.

The night sound modes are set up to improve the listening experience at night 
when noise levels are low. Moreover, you can limit the volume level so that when 
the programme content changes (e.g. through advertising breaks etc.) the volume 
does not suddenly drastically change.

Press several times to select the required night mode.

Select NIGHT : CINEMA, when you are watching a film,  
to reduce the dynamic range of the film soundtrack so that 
you can hear the dialogue better when the volume is turned 
down.

Select NIGHT : MUSIC, when you are listening to music 
sources to enjoy a natural sound.

Select TV EQUAL VOL, if you are watching TV programmes.

Select OFF to leave the volume mode.

34

 Set effect level of compression within 4 seconds of 

selecting night mode.

Select Effect.Lvl : MIN for minimal compression.

Select Effect.Lvl : MID for normal compression.

Select Effect.Lvl : MAX for maximum compression.

If  a  subwoofer  is  available,  the  Sound  Projector  is  capable  of  producing  the 
impression of an improved bass performance. The bass performance can also be 
improved without a subwoofer.

Press the button BASS several times to select the required 
bass mode.

Select TruBass MID for normal effects.

Select TruBass MID for maximum effects.

Select TruBass OFF to switch the function off.

You can set the initial sound beam output level of each channel with the aid of the 
test sound or the audio output played back in the respective sound beam mode 
to attain a more authentic surround sound experience.

Using the test sound
You can use the test sound function to emit the test sound from every channel to 
manually balance the channel levels.

Press the button briefly. A test sound is emitted.

56

 Select channel. The selected channel is shown in the 

display.

34

 Set level.

 TEST FRONT L  left front channel
  TEST CENTER  Centre channel
 TEST FRONT R  right front channel
  TEST SUR. R  right surround channel
  TEST SUR. L  left surround channel
 

TEST SWFR  Subwoofer (only if connected)

Switch test sound off.